1. Edition - August 2007
97.90 Euro
2007. 416 Pages, Hardcover
ISBN-10: 0-470-05678-9
ISBN-13: 978-0-470-05678-3 - John Wiley & Sons






Sample Chapter

Short description
This book takes a practical, design-oriented and code-based approach to designing wood structures. Taking an integrative view of structures, the book strives to present structural components and members in the context of the entire building, such that the foundation, walls, beams and roof all work together in providing strength. This is in contrast to existing books where the components are presented in an isolated framework. The book provides dozens of practical, worked examples useful for instructing students on the fundamentals while also serving as design aids for professional engineers working on real-world projects.

From the contents
Preface.

Chapter one INTRODUCTION: WOOD PROPERTIES, SPECIES, AND GRADES.

1.1 Introduction.

1.2 Typical Structural Components of Wood Buildings.

1.3 Typical Structural Systems in Wood Buildings.

1.4 Wood Structural Properties.

1.5 Factors Affecting Wood Strength.

1.6 Lumber Grading.

1.7 Shrinkage of Wood.

1.8 Density of Wood.

1.9 Units of Measurement.

1.10 Building Codes.

Chapter two INTRODUCTION TO STRUCTURAL DESIGN LOADS.

2.1 Design Loads.

2.2 Dead Loads.

2.3 Tributary Widths and Areas.

2.4 Live Loads.

2.5 Deflection Criteria.

2.6 Lateral Loads.

Chapter three ALLOWABLE STRESS DESIGN METHOD FOR SAWN LUMBER AND GLUED LAMINATED TIMBER.

3.1 Allowable Stress Design Method.

3.2 Glued Laminated Timber.

3.3 Allowable Stress Calculation Examples.

3.4 Load Combinations and the Governing Load Duration Factor.

Chapter four DESIGN AND ANALYSIS OF BEAMS AND GIRDERS.

4.1 Design of Joists, Beams, and Girders.

4.2 Analysis of Joists, Beams, and Girders.

4.3 Sawn-Lumber Decking.

4.4 Miscellaneous Stresses in Wood Members.

4.5 Preengineered Lumber Headers.

4.6 Flitch Beams.

4.7 Floor Vibrations.

Chapter five WOOD MEMBERS UNDER AXIAL AND BENDING LOADS.

5.1 Introduction.

5.2 Pure Axial Tension: Case 1.

5.3 Axial Tension plus Bending: Case 2.

5.4 Pure Axial Compression: Case 3.

5.5 Axial Compression plus Bending: Case 4.

5.6 Practical Considerations for Roof Truss Design.

Chapter six ROOF AND FLOOR SHEATHING UNDER VERTICAL AND LATERAL LOADS (HORIZONTAL DIAPHRAGMS).

6.1 Introduction.

6.2 Roof Sheathing: Analysis and Design.

6.3 Floor Sheathing: Analysis and Design.

6.4 Panel Attachment.

6.5 Horizontal Diaphragms.

Chapter seven VERTICAL DIAPHRAGMS UNDER LATERAL LOADS (SHEAR WALLS).

7.1 Introduction.

7.2 Shear Wall Analysis.

7.3 Shear Wall Design Procedure.

7.4 Combined Shear and Uplift in Wall Sheathing.

Chapter eight CONNECTIONS.

8.1 Introduction.

8.2 Design Strength.

8.3 Adjustment Factors for Connectors.

8.4 Base Design Values: Laterally Loaded Connectors.

8.5 Base Design Values: Connectors Loaded in Withdrawal.

8.6 Combined Lateral and Withdrawal Loads.

8.7 Preengineered Connectors.

8.8 Practical Considerations.

Chapter nine BUILDING DESIGN CASE STUDY.

9.1 Introduction.

9.2 Gravity Loads.

9.3 Seismic Lateral Loads.

9.4 Wind Loads.

9.5 Components and Cladding Wind Pressures.

9.6 Roof Framing Design.

9.7 Second Floor Framing Design.

9.8 Design of a Typical Ground Floor Column.

9.9 Design of a Typical Exterior Wall Stud.

9.10 Design of Roof and Floor Sheathing.

9.11 Design of Wall Sheathing for Lateral Loads.

9.12 Overturning Analysis of Shear Walls: Shear Wall Chord Forces.

9.13 Forces in Horizontal Diaphragm Chords, Drag Struts, and Lap Splices.

9.14 Design of Shear Wall Chords.

9.15 Construction Documents.

References.

Appendix A Weights of Building Materials.

Appendix B Design Aids.

Index.